Little Kukla Bubble Skirt Tutorial

Here it is, just as I promised!

THE FALL BUBBLE SKIRT TUTORIAL!

These fabulous little Matryoshka Dolls stole my heart when they arrived.  

I have a thing for little Russian Nesting Dolls these days.  They are popping up everywhere lately, and are super popular. And super adorable. 

I knew that I had to make my little lady a fall skirt out the Dolls in Retro.  

Here is the tutorial:

I used these 3 prints from the Little Kukla Collection.

(I LOVE LOVE LOVE that collection) 

Size about 3T-4T

1/2 Yard Dolls,                     about 1/2 yard Orange,           about 1/4 yard Birds

  

and 1/4 Yard of this print from the Chrysalis Collection for the belt:

I cut about 1/2 yard of the fabric for the main piece.

I left the fold along the side, and sewing the other sides together, right sides together.

So then you get a tube/circle of the main piece.

Then I folded the bottom half of the fabric up underneath the top half. Creating a little bubble on the bottom. 

 Next I ruffled the top, both layers, all the way around. Set your machine to the longest length stitch, and sew a straight stitch all the way around, don't back stitch.  Then pull one of the threads and push the fabric towards the center until it ruffles all the way around.

Next, I cut a 5" strip of the Orange Fabric for the band.  I trimmed the ends off so it was a strip about 5"x22". You will want to cut it just a little bit bigger than the waist measurement of it's future owner.  Then I took that strip and sewed the short ends together, right sides together.  Forming a loop. 

 I slipped my loop over the main piece, so all of the main piece was inside the Orange loop.  Then I adjusted my ruffles so it was roughly the same size as the orange loop. Fitting just perfectly inside the loop.

 See how it is sandwiched in there?

Then I sewed a straight stitch, all the way around the skirt. Connecting the band to the main piece of the skirt. 

 Lookin Good!

I didn't have any orange thread, so I found the next best thing :)

And top stitched all the way around the band, making it look nice and clean.

Now it is time for the elastic casing. Fold over the top of the band about 1/2", and then fold it over again however wide your elastic is, and press.

Then sew all the way around the top of the band and be sure to leave a small opening for the elastic.

Attach a large safety pin to one end of your elastic.

And start feeding it through your skirt casing. You should end up with something like this.

Now try it on your little gal, and adjust the length of the elastic as needed. Then sew the ends of your elastic together.

Once the elastic is inside, sew your opening shut. 

Now for the belt!

I cut (3) 2.5x44" strips of fabric.

I sewed them together end to end and made one really long strip.

The I folded that strip right sides together the long ways, and sew all the way down the strip. 

Then you will need to turn the strip right sides out.  This can tricky. Feed it through a really long pencil, or spoon. 

 Then press, and if you want you can sew a straight stitch along both sides of the strip to make it look a little more finished and polished. 

You can tie your belt on anyway you like. 

I wanted mine to hang a little loosely. 

Once I tied it the way I wanted, I sewed it to keep it in place.

I made my flower by using a 5" strip of fabric, folded in half and then ruffled along one edge. 

  I curved the ruffle to form a circle, and then sewed the two ends together.  Don't worry about the raw edges, this will be the back of the flower. 

I used some leftover orange fabric to make the rosette. HERE is a  little tutorial for making  rosettes. 

I hand-stitched the belt in a few places just to keep it in place, and I had sewed the flower onto the belt.  

Girlfren loved it!

 She couldn't wait to slip it on and model for me. 

3 years old and loves to model.....

What are her teen years going to be like?

Heaven help me!

Happy Sewing Everyone!

New Fabric Friday

Is Friday your favorite day of the week?

Me too!

Here's What's New in the shop this week!

 Ahoy Matey from Michael Miller Fabrics

This collection will knock your socks off when you see it in person!

Seriously, socks all over the place!!!!!

Those burnt oranges and navy's are an incredible combination.

Out to Sea Anchors in Raspberry have finally arrived.

The Out to Sea collection is complete.  

 

I am still waiting for my girls to find the sharpies and ruin their current bedspreads so I have a reason to redo their room in this collection. Shhh, don't tell the hubs. 

 Also arriving this week from Michael Miller Fabrics

Swedish Owls in Brown

May I give you a suggestion.....Don't wait to order these sweet little owls!

They are going fast!

Have a wonderful weekend, & put those sewing machines to work!

Halloween Banner for $1!

1 Yard Ric Rack:  $0.50

1 Yard Ribbon: $0.30

1 Sheet of Cardstock $0.20

Newspaper Scraps

Matches

Glue

My mantel was crying out for some Halloween fun, and this banner was easy, quick and  SUPER CHEAP!

Step 1:  Print off your letters. I used my Inkjet printer and the CAST IRON font. 

I printed them onto off white cardstock.  But you could print them onto anything you want. 

Cut out your letters. 

Step 2. Then I took a tissue, got it wet and smeared the ink on the letters a little bit. 

You know, make them look old and stuff. 

Step 3: Cut out some newspaper. Any shape, any size you want. 

 Step 4: Plug in your glue gun and grab some ric rack.  I had some black ribbon I added to the back of the ric rack, just for fun.  

 Step 5: With my glue gun on LOW, I added just a tad bit of glue to the back of the ric rack and glued it to the ribbon.  ***I put wax paper under my project, makes for easy clean up!***

 Step 6: Then I got a little crazy and decided to burn the edges of the my newspaper.  

See how cute it looks burnt!  CAUTION! Newspaper burns quickly.  I would do this over a sink full of water. I almost burnt my house down twice and was sure glad I had that sink of water!

Step 7:  Grab your glue of choice, (Rubber Cement for me) and glue your letters on.

Ta Dah!  My mantel looks so much cuter!  That spider was my lone Halloween decoration on that side of the mantel, so the banner was a necessity!

Love the burnt edges! So worth the almost fire!

Here's a backed-up shot!  The kitchen is look'n festive!